Please answer all the questions. This will enable us to supply you with the correct product. Please contact our sales staff if you require help with any of these  questions or need some more details.

Company:

Contact:

e-mail:

Tel:

Fax:

Which type of encoder do you require?

Is the encoder for use in applications requiring Ex approval?

Which type of output is required?

If you have selected 'Other' output stage, please insert the relevant details here.

Which output signal do you require? Our standard output is a 50% duty cycle. If you need 'One shots', please specify the pulse length. below.

µsec

Please enter 'One shot' pulse length here

What is the required supply voltage? (fixed or variable) VDC

Should the cable shield be connected to the 0 Volt line?

Please enter the number of output channels you require. Our standard phase shift is 25% on 2 channels and 33% on 3 channels. 3 channels only available on type 01-08 encoders.

Please enter the number of pulses per channel per revolution.

Which direction will the encoder shaft revolve during operation? Direction is expressed as CW (clockwise) or CCW (counter clockwise) when you look at the encoder with the shaft facing you.

Please enter the length of the cable you require. (in centimetres)

Do you require a mechanical 'free wheel' clutch, which will allow the encoder shaft to rotate in one direction only?

Electronic backward pulse suppression, monitoring of illegal states, memory and alarm functions are available in encoder type 01-08 and type 01-09. Click here if you would like more details.

Can you specify the type of volume meter you will use?
(Or supply a drawing of the required encoder coupling)

Should Eltomatic design a mounting bracket to suit the volume meter you will use? If yes, please supply any drawings available of the top of the volume meter.

Do you require a mechanical totalizer?

If you do not need a totalizer, please disregard the remaining questions.

What is the volume in Litre per revolution of your volume meter?

Do you require integrated totalizer type

If you selected the EZ15 totalizer, which reading angle do you require on the window?

If you require a remote totalizer, which type should it be?

If you require a remote totalizer, please specify the length of the flex-drive cable you require, (in cm)